logo
Solicitar una cotización |
Inicio ProductosPegamento epoxi AB

Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications

Todos los productos

Pegamento epoxi AB

(103)

Pegamento de acrílico modificado

(31)

No más de pegamento de los clavos

(17)

adhesivo de rosca

(22)

fabricante de la junta

(36)

502 Super pegamento

(8)

El sellador de azulejos de cerámica

(7)

Adhesivos electrónicos de hardware

(14)

Adhesivos para vehículos

(14)

Pegamento para reparaciones domésticas

(12)

Adhesivos para decoración de muebles

(7)
Estoy en línea para chatear ahora

Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications

Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications
Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications

Ampliación de imagen :  Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications

Datos del producto:
Lugar de origen: Hunan, China
Nombre de la marca: DEYI
Número de modelo: DY E705
Pago y Envío Términos:
Cantidad de orden mínima: 2880
Contacto

Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications

descripción
Color: Blanco y negro Componente: 2 componente
Relación de mezcla: 1: 1 Tiempo de curado: 5 minutos
Tiempo de curado completo: 24 horas Función: Bonding+Sealing
Duración: 12 meses Material principal: EPOXI
Viscosidad: > 100000 cps/25 ℃ Tiempo de trabajo: 5 minutos (25 ℃/100 g)
Tiempo seco del tacto: Entre 5 y 10 minutos. Fuerza de cizallamiento en el regazo: ≥ 16 MPA
Resistencia al calor: -60 a +100 ℃ Color curado: negro ligero
Tamaño de embalaje: 47x46x35cm (20g/tarjeta)
Resaltar:

Full Cure in 12 Hours Epoxy AB Glue

,

12 Months Shelf Life Epoxy Resin Adhesive

,

Water Resistant Two Component Epoxy

Factory Price 5 Minutes Epoxy Resin/Epoxy Adhesive AB Glue for Metal and Glass
Product Description
4-MIN EPOXY ADHESIVE is a high-performance adhesive for both household and industrial applications, offering superior bond strength for various materials.
Properties
  • Ideal for repairs and welds with superior bond strength
  • Bonds to metal, plastic, rubber, wood, ceramics, glass, and concrete
  • Resistant to acid, alkali, and oil
  • Non-flammable, non-shrinking, and waterproof
  • Creates metallic grey finish that can be filed, ground, and drilled
Applications
4-MIN EPOXY ADHESIVE is suitable for bonding and repairing in various industries including machinery, electronics, automobiles, shipbuilding, chemical industry, and handicrafts. It forms excellent bonds with metals, rubbers, leathers, and various plastics.
Directions
  • Clean substrate surface to remove contaminants like water, dust, and oil
  • Remove cap from tube and puncture seal
  • Mix part A and part B at 1:1 ratio until uniform color is achieved (use within 20 minutes)
  • Apply thin coat to both surfaces
  • No clamping needed - slight pressure during setting is sufficient
  • Note: Below 5℃ will extend curing time
Storage & Warnings
Storage:
  • Store in shady, dry, well-ventilated, damp-proof area
  • Keep at room temperature
  • Keep away from ignition sources
Warnings:
  • Irritating to skin and eyes
  • Keep out of reach of children
  • In case of contact, flush with water and seek medical attention if necessary
Technical Parameters
Color Cured Color Viscosity (CPS/25℃) Mixing Ratio Work Time (25℃/100g) Cure Time (25℃/100g) Lap Shear Strength (St-St) Heat Resistance (℃) Shelf Life (25℃)
A:black
B:milky white		 Light Black A:>100000
B:>100000		 1:1 5 Minutes Touch Dry: 5-10 Mins
Full cure: 12 hrs		 ≥16 MPa -60 to +100 12 months
Our Main Products
Packaging & Shipping
Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications 0
Packaging Shipping
A: 20g/card 24 cards/inner box 288 cards/ctn DIM:47x46x35cm
B: 80G/card 12 cards/inner box 144 cards/ctn DIM:68X37X35CM 		1. FOB Terms(FOB GUANGZHOU/SHANGHAI/CHANGSHA) or EX Works
2. Free sample available
3. 24 hours after-sale service
4. Customized design and branding available
Company Information
Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications 1 Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications 2
FAQ
Q1: Are you a factory or a trading company?
Of course, we are a Factory.
Q2: Can you provide the samples?
Yes, we can. The sample is free, and you only need bear the freight.
Q3: How long can I get sample?
The sample time is 5-7 days and express delivery usually needs 5-7 day.
Q4: Production period and delivery time?
3 days to 7 days.
Q5: What's your MOQ (min order quantity)?
Our MOQ is 3000 pairs.
Q6: How can you control of product quality?
We have experienced and skilled labors and QC team. Goods are 100% inspection before packing.

etiqueta:

adhesivo ab,

adhesivo adhesivo,

adhesivo epoxi ab

Contacto
Hunan Baxiongdi New Material Co., Ltd.

Persona de Contacto: SU

Teléfono: 008615200906996

Fax: 86-731-86677379

Envíe su pregunta directamente a nosotros (0 / 3000)

Sobre

Pegamento epoxi AB

Adesivo de resina epoxi súper fuerte para la salud de la soldadura de metales No hay pegamento epoxi AB tóxico

Adhesivo epoxi transparente y resistente al calor para acero inoxidable de alta temperatura

Sistema profesional de resina epoxi 30 Min curando la resina de la resina de la resina de la resina de la resina de la resina de la resina

Pegamento de acrílico modificado

5 minutos de curado inicial de adhesivo acrílico modificado para superficies rojas y verdes

Jt40 Acrílico modificado AB pegamento acrílico y verde translúcido con tiempo de trabajo de 5 minutos

Adesivo transparente de acrílico modificado AB de 5 minutos para las necesidades diarias

DEJA UN MENSAJE

Política de privacidad | China Bueno Calidad Pegamento epoxi AB Proveedor. © 2024 - 2025 Hunan Baxiongdi New Material Co., Ltd.. All Rights Reserved.