logo
Solicitar una cotización |
Inicio ProductosPegamento epoxi AB

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Todos los productos

Pegamento epoxi AB

(118)

Pegamento de acrílico modificado

(31)

No más de pegamento de los clavos

(17)

adhesivo de rosca

(22)

fabricante de la junta

(36)

502 Super pegamento

(8)

El sellador de azulejos de cerámica

(7)

Adhesivos electrónicos de hardware

(14)

Adhesivos para vehículos

(14)

Pegamento para reparaciones domésticas

(12)

Adhesivos para decoración de muebles

(7)
Estoy en línea para chatear ahora

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Ampliación de imagen :  Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Datos del producto:
Lugar de origen: Hunan, China
Nombre de la marca: DEYI
Pago y Envío Términos:
Cantidad de orden mínima: 10000
Contacto

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

descripción
Color: Claro Viscosidad: > 100000 cps/25 ℃
Ratio de la mezcla: 1: 1 Tiempo de trabajo: 20 minutos
Tiempo seco del tacto: 30 minutos Tiempo completo de cura: 24 horas
Fuerza de cizallamiento en el regazo: ≥ 16 MPA Resistencia al calor: -60 a +100 ℃
Duración: 12 meses Material principal: Etilo-cianocrilato
Resistencia al ácido: Sí Resistencia al álcali: Sí
Resistencia al aceite: Sí Impermeable: Sí
Ininflamable: Sí
Resaltar:

Heat Resistant Epoxy AB Glue

,

Touch Dry in 30 Minutes Epoxy Resin Adhesive

,

Full Cure in 24 Hours Two-Component Epoxy

30 Minutes Epoxy Resin/Epoxy Adhesive AB Glue Black and White
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 0
DEYI-730 30 minutes epoxy resin/epoxy adhesive AB glue black and white
30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.
Technical Parameters
Color Viscosity (CPS/25℃) Mixture Work Time (25℃/100g) Cure Time (25℃/100g) Lap Shear Strength (St-St) Heat Resistance (℃) Shelf Life (25℃)
A:black A:>100000 1:1 20 Minutes Touch Dry:30 Mins ≥16 Mpa -60 to +100 12 months
B:milky white B:>100000 Full Cure: 24 hrs
Product Description
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 1 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 2 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 3 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 4
Storage & Warnings
Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.
Warnings:
  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
Directions
  • Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
  • Remove the cap from the tube and puncture the tubes.
  • Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
  • Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while material sets.
  • If temperature is below 5℃, it will take a longer time to cure.
Cautions
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 5

etiqueta:

adhesivo ab,

adhesivo adhesivo,

adhesivo epoxi ab

Contacto
Hunan Baxiongdi New Material Co., Ltd.

Persona de Contacto: SU

Teléfono: 008615200906996

Fax: 86-731-86677379

Envíe su pregunta directamente a nosotros (0 / 3000)

Sobre

Pegamento epoxi AB

Adesivo de resina epoxi súper fuerte para la salud de la soldadura de metales No hay pegamento epoxi AB tóxico

Adhesivo epoxi transparente y resistente al calor para acero inoxidable de alta temperatura

Sistema profesional de resina epoxi 30 Min curando la resina de la resina de la resina de la resina de la resina de la resina de la resina

Pegamento de acrílico modificado

5 minutos de curado inicial de adhesivo acrílico modificado para superficies rojas y verdes

Jt40 Acrílico modificado AB pegamento acrílico y verde translúcido con tiempo de trabajo de 5 minutos

Adesivo transparente de acrílico modificado AB de 5 minutos para las necesidades diarias

DEJA UN MENSAJE

Política de privacidad | China Bueno Calidad Pegamento epoxi AB Proveedor. © 2024 - 2025 Hunan Baxiongdi New Material Co., Ltd.. All Rights Reserved.